comet-open

Comet Phase 1: Open

Before starting or recovering, read and follow comet/reference/classic-layout.md. Every OpenSpec CLI call in this file must use the adapter, and every file path must use the <classic-*> logical roots bound by that protocol.

Prerequisites

• No active change, or user wants to create a new change

Steps

0. Output Language Constraint

Every prompt and artifact request passed to OpenSpec must include the resolved Comet artifact language, using normalized ids such as en or zh-CN. Before .comet.yaml exists, read classic.language from project .comet/config.yaml, then fall back to global ~/.comet/config.yaml; after the change is initialized, use comet state get <name> language. If no configured language exists, fall back to the current user request language. The generated proposal.md, design.md, and tasks.md must use that language as their main language.

0a. Current Change Binding

When resuming an existing change, inspect <classic-change-dir>/.comet.yaml first:

• If it exists and parses, select the change as the first state operation
• If it is missing but the change directory is valid, run comet state init <change-name> full, then select the change
• If it is malformed, stop and report the parse error; repair it manually from version control, a backup, or verifiable artifacts before continuing, and never overwrite a damaged file with state set

comet state select <change-name>

When creating a new change, initialize .comet.yaml first, then immediately run the same command; never fabricate a selection before state exists.

0b. OpenSpec Compatibility Check

Before any OpenSpec status or instructions command, run:

comet classic openspec -- --version

This flow requires OpenSpec >= 1.5.0. Stop immediately if the version is older than 1.5.0, cannot be parsed, the command is unavailable, or it exits non-zero. Ask the user to run npm install -g @fission-ai/openspec@latest and retry. Never continue with an older CLI that lacks the applyRequires, artifactPaths, changeRoot, or resolvedOutputPath contracts.

1. Explore Ideas and Clarify Requirements

Immediately execute: Use the Skill tool to load the openspec-explore skill. Skipping this step is prohibited.

External OpenSpec Skill override: After loading, use only its exploration method. Do not execute any instruction that invokes the official CLI directly, changes to a fixed cwd, or reads or writes a fixed physical OpenSpec path. Route every CLI call through comet classic openspec -- <args...> and replace every file path with the <classic-*> logical roots bound for this run.

After the skill loads, explore the problem space following its guidance, but do not treat one Q&A turn as sufficient clarification. You must continue asking, align with the user, and form a clarification summary covering:

• Goals: the problem the user truly wants to solve and the expected outcome
• Non-goals: what is explicitly out of scope for this change
• Scope boundaries: included/excluded modules, users, platforms, or data
• Key unknowns: unresolved assumptions, risks, or dependencies
• Draft acceptance scenarios: at least the core success scenario and important boundary scenarios

The clarification summary must include: goals, non-goals, scope boundaries, key unknowns, and draft acceptance scenarios.

1a. PRD Split Preflight (Blocking Point)

When the user input is a large PRD, roadmap, complete product plan, or the clarification summary shows multiple independent capabilities, modules, user journeys, or milestones, must evaluate whether it should be split into multiple changes before creating OpenSpec artifacts.

The split preflight must be based on clarified information and output a proposed split list. Each proposed split item must include:

• Suggested change name
• Goals and scope boundaries
• Explicit non-goals
• Dependencies or recommended execution order
• Core acceptance scenarios

Recommend splitting when any condition applies:

• The PRD contains multiple capabilities that can be independently designed, built, verified, and archived
• Multiple modules or user journeys are involved, and part of them can be delivered independently
• Clear phased milestones exist
• The work is expected to produce multiple delta specs or more than 3 large tasks
• Failure or delay in one part should not block other parts from entering later phases

When splitting is recommended, must follow the comet/reference/decision-point.md protocol to pause and wait for the user's choice.

The user choices must include:

• "Create multiple OpenSpec changes" — create independent changes from the proposed split
• "Keep everything as one change" — continue the single-change flow and record the reason for not splitting in proposal/design/tasks
• "Adjust the split plan before continuing" — after the user describes the adjustment, output the revised proposed split list and ask for confirmation again

Every accepted split item must be created as an independent change through /comet-open, not by calling /opsx:new directly. /comet-open creates both OpenSpec artifacts and .comet.yaml, ensuring each change enters the Comet state machine.

Must not create proposal.md, design.md, or tasks.md before the user completes the PRD split choice. If the user chooses to create multiple changes, the current /comet-open invocation only completes split confirmation and coordination, then enters /comet-open for each split item in the user-confirmed order.

Immediately after the user confirms multiple changes, persist the accepted split to .comet/batches/<batch-id>.json. Use a stable kebab-case batch-id. The file must record at least version, the original goal summary, creation time, the ordered change names, and each item's goals, scope, non-goals, acceptance scenarios, and pending|open-complete|selected status. Atomically update it after each item is created or completed. This is a batch orchestration manifest, not a replacement for each change's .comet.yaml.

In batch split mode, entering /comet-open for each split item must explicitly mark it as a "confirmed split item" and carry that split item's goals, scope, non-goals, and acceptance scenarios. Confirmed split items skip the PRD split preflight by default, unless the split item itself still clearly contains multiple independent capabilities.

In batch split mode, a single split item must not auto-advance to /comet-design after completing the open phase. After splitting is complete, must pause and ask the user which change to start; after the user chooses, advance only that change into /comet-design, while other changes remain active and can be resumed later through /comet-classic.

Batch completion hard check (must not be skipped): after every split item completes its own open phase, run the following for each <name> in the user-confirmed list:

comet classic openspec -- status --change "<name>" --json
comet state check <name> design

The OpenSpec JSON must satisfy all of these conditions:

• Resolved changeRoot must equal the resolver-bound <classic-change-dir>; stop if it does not, because Classic runtime does not support an external change root
• The schema must include core artifact ids proposal, design, and tasks; extra artifacts are allowed, but a missing core id is an incompatible schema
• Every artifact listed in applyRequires must be done in artifacts
• Concrete outputs in artifactPaths.<artifact-id>.existingOutputPaths (or resolvedOutputPath from instructions) must exist and be non-empty
• Treat isComplete as diagnostic only; it neither replaces the applyRequires implementation-readiness check nor lets optional artifacts block phase advancement

If any split item fails these checks, must not report splitting complete or ask which change to start. Stop and resume /comet-open from that change's first ready or blocked artifact. If OpenSpec passes but Comet state fails, repair .comet.yaml initialization or phase, then rerun the checks for the entire batch.

Only after every split item passes both CLI checks may you pause and ask which change to start. Mark the chosen item selected in the batch manifest, then advance only that change into /comet-design; other changes remain active and can be resumed later through /comet-classic.

On resume, read .comet/batches/<batch-id>.json first, then run the CLI checks above for already-created active changes. Do not recreate items that fully pass; resume incomplete items from the first ready artifact returned by OpenSpec. Create missing items from the persisted manifest. If the manifest is missing or damaged, stop and ask the user to rebuild/confirm it instead of inferring the original batch boundary from directory names.

1b. Resolve Requirements and Change Name (Non-blocking by Default)

Before creating OpenSpec artifacts, turn Step 1 clarification into a resolved brief containing the goal, non-goals, scope boundaries, key unknowns, and draft acceptance scenarios. Derive one kebab-case English change name that accurately represents that scope.

• Continue directly when scope and naming are both unambiguous. Do not pause merely to approve a summary or name; final review confirms the change name, scope, and artifacts together
• If the user supplied a name, normalize it to kebab-case and echo it in the progress update. Do not re-confirm when normalization preserves meaning
• Reuse a confirmed batch item's persisted summary and name. Re-clarify only when scope drift or missing manifest data is detected
• Use comet/reference/decision-point.md for one joint question only when mutually exclusive choices still change scope or the target change identity. Naming preference alone is not a blocking point

OpenSpec names must be kebab-case English using lowercase letters, digits, and single hyphens. When a collision exists but the target remains clear, derive a stable non-conflicting name and continue. Ask only when Comet cannot determine whether to reuse the existing change or create a new one.

Do not run comet classic openspec -- new change or create proposal/design/tasks while the resolved brief or name remains ambiguous. Continue clarification or resolve the genuine user decision before Step 2.

2. Create Change Structure + Initialize State

Immediately execute: Use the Skill tool to load the openspec-new-change skill. Skipping this step is prohibited.

External OpenSpec Skill override: After loading, use only its change-creation semantics. Do not execute any instruction that invokes the official CLI directly, changes to a fixed cwd, or writes the change under a fixed physical OpenSpec root. Run create, status, and instructions through comet classic openspec -- <args...>, and use <classic-change-dir> and the other logical roots for every file path.

Full /comet-classic workflow must not use the Skill tool to load the openspec-propose skill by default; only load it when the user explicitly requests generating the proposal and artifacts in one pass.

External OpenSpec Skill override: Apply the same rule to openspec-propose: ignore direct official CLI, fixed-cwd, and fixed physical OpenSpec path instructions; use the adapter and resolver-returned <classic-*> logical roots.

After the skill loads, follow its guidance to create the change skeleton. When Step 1b has produced an unambiguous resolved brief, override its "STOP and wait for user direction" behavior to avoid a duplicate question.

Use the Step 1b resolved brief directly to populate artifact content. Fall back to the skill's question flow only when ambiguity remains that would change scope.

Immediately after creating the change skeleton, initialize recoverable state instead of waiting until every artifact is generated:

comet state init <name> full
comet state select <name>
comet state check <name> open

Stop if any command fails. Then run comet classic openspec -- status --change "<name>" --json once and perform compatibility preflight:

• Resolved changeRoot must equal the resolver-bound <classic-change-dir>, and planningHome (when present) must remain inside the current repository
• artifacts must contain core ids proposal, design, and tasks; extra artifacts are allowed
• applyRequires must be a parseable list of artifact ids and every id must exist in artifacts
• Stop on missing fields, escaping paths, or missing core ids; never fall back to a guessed fixed template

After preflight, generate the implementation-required artifacts from the OpenSpec schema and dependency graph:

OpenSpec status-driven artifact loop:

1. Run comet classic openspec -- status --change "<name>" --json and parse the complete JSON.

2. Exit when every item in applyRequires is done; record isComplete as diagnostic only and do not use it as a phase blocker.

3. From unfinished ready artifacts, prioritize items that advance the applyRequires dependency closure and process them in CLI-returned order. Must not hard-code generation order or assume the schema contains only proposal/design/tasks.

4. Fetch current instructions for each ready <artifact-id>:

   comet classic openspec -- instructions <artifact-id> --change "<name>" --json
   

5. For the returned JSON instruction payload, you must:

   • Read every completed dependency artifact listed in dependencies
   • Use template as the artifact structure
   • Follow instruction guidance
   • Apply context and rules as constraints — must not copy them into artifact content
   • Write to resolvedOutputPath; for wildcard outputs, create each concrete file required by the instruction
   • Verify the concrete output files returned by the CLI exist and are non-empty

6. Re-run status after creating each artifact and revalidate changeRoot, core ids, and applyRequires. Do not regenerate items that become done; process newly ready items in the next loop.

Blocking and failure handling: if applyRequires is incomplete and no ready artifact can advance its dependency closure, report missingDeps for the relevant blocked artifacts and stop. Do not guess order or skip dependencies. Also stop if status/instructions fails, returns invalid JSON, escapes the repository, or provides no usable resolvedOutputPath. Must not fall back to hard-coded artifact prose.

Naming and scope guard: Use the kebab-case English name resolved in Step 1b; never use a non-kebab-case name. Change scope must match the resolved brief and user request; do not expand or narrow it independently.

Confirm the following artifacts have been created:

<classic-change-dir>/
├── .openspec.yaml
├── .comet.yaml
├── proposal.md       # Why + What: problem, goals, scope
├── design.md         # How (high-level framework): architecture decisions, approach selection (deep technical design is refined in the design phase Design Doc)
└── tasks.md          # Task checklist (checkboxes)

3. Entry State Verification

Verify state machine has been correctly initialized:

comet state check <name> open

Proceed to Step 4 after verification passes. The script outputs specific failure reasons when verification fails.

Idempotent recovery algorithm: all open phase operations can be safely re-executed. On recovery, process the status in this order:

1. If state is missing, run comet state init <name> full; if malformed, stop and repair it instead of overwriting it. Then select the change and run comet state check <name> open.
2. Run status and revalidate changeRoot, core ids, applyRequires, artifacts, and missingDeps.
3. done: keep the artifact unchanged and do not regenerate it.
4. ready: fetch its instructions, write the returned output, and immediately rerun status.
5. blocked: follow missingDeps and first complete dependencies in the applyRequires closure; never generate a blocked artifact directly.
6. Repeat until every item in applyRequires is done.

If the required dependency graph cannot advance, list the relevant blocked artifacts and missingDeps, then stop. Directory or fixed-file presence cannot replace the CLI decision; conversely, an optional artifact outside applyRequires must not block implementation solely because isComplete is false.

4. Content Completeness Check

Run status again. Confirm core ids exist, every item in applyRequires is done, and concrete files in artifactPaths.<id>.existingOutputPaths for required artifacts exist and are non-empty. If any condition fails, do not enter Step 5 or execute the phase guard.

Then check key artifact content: proposal covers problem, goals, scope, and non-goals; design covers high-level decisions and data flow; tasks contains clear work items. If the schema returns specs or other artifacts, check their content against their instructions as well; the fixed three documents must not hide an incomplete schema artifact.

5. User Review and Confirmation (Blocking Point)

After all OpenSpec artifacts are complete and the content check passes, must follow the comet/reference/decision-point.md protocol to pause and wait for user confirmation. Must not execute the phase guard or auto-transition before user confirmation.

The final review confirms the change name, scope, and artifact content together. Do not skip it because Step 1b resolved the brief, and do not add another routine summary/name confirmation before it.

The user confirmation question must be presented as a single-select question with the following summary and options:

Summary content:

• Change name and resolved brief: final name, goal, non-goals, scope boundaries, and key unknowns
• proposal.md: problem background, goals, scope
• specs and other schema artifacts: capabilities, requirements, and key acceptance scenarios
• design.md: high-level architecture decisions, approach selection
• tasks.md: task count and key task descriptions

Options:

• "Confirm, proceed to next phase" — artifacts meet expectations, execute phase guard transition
• "Needs adjustment" — include adjustment notes, modify and re-request confirmation

After user selects "Confirm", proceed to exit conditions. When user selects "Needs adjustment", modify the corresponding files per their notes, then request confirmation again.

Exit Conditions

• OpenSpec compatibility preflight passes, every applyRequires item is done, and required outputs are non-empty
• User has confirmed all OpenSpec artifact content meets expectations
• Phase guard: Run comet guard <change-name> open --apply; after all PASS, auto-transitions to next phase

Must use --apply before exit, otherwise .comet.yaml remains at phase: open and the next phase entry check will fail.

comet guard <change-name> open --apply

Full workflow auto-transitions to phase: design; hotfix/tweak presets auto-transition to phase: build.

Automatic Handoff to Next Phase

Follow comet/reference/auto-transition.md. Key command:

comet state next <change-name>

• NEXT: auto → invoke the skill pointed to by SKILL to enter the next phase
• NEXT: manual → do not invoke the next skill; return control with HINT, end the invocation, and do not create another confirmation point
• NEXT: done → workflow is complete, no further action needed

hotfix/tweak presets are controlled by their corresponding preset skill (phase goes directly to build); their next returns the corresponding preset skill.