local-dev

Freenet Local Development & Node Interaction

Guidance for running local Freenet nodes, publishing contracts, querying node state, and debugging dApps during development.

Prerequisites

which freenet fdev
rustup target add wasm32-unknown-unknown

Architecture

Ports & Services

HTTP Endpoints

Dashboard

The home dashboard at http://localhost:7509/ shows:

• Connection status, peer count, own ring location
• Peer table: address, ring location, type (Peer/Gateway), bytes sent/received, connected duration
• External address (NAT traversal result), NAT statistics
• Contract counts (hosted, subscribed, managed)
• Operation stats (GET/PUT/UPDATE/SUBSCRIBE success/failure counts)

Scraping peer data:

# Get own location
curl -s http://localhost:7509/ | grep -o 'own-loc[^<]*<[^>]*>[^<]*'

# Get peer rows (address, location, type, sent, recv, uptime)
curl -s http://localhost:7509/ | grep -o 'peer-row[^}]*'

Node Data Locations

Contents: contracts/ (WASM), delegates/, secrets/, db/, config.toml

Log Directory Convention

Choose an appropriate log directory for your OS:

• macOS: ~/Library/Logs/freenet-test-node
• Linux: ~/.local/share/freenet-test-node/logs

The examples below use $LOG_DIR as a placeholder. Set it once:

# macOS:
LOG_DIR=~/Library/Logs/freenet-test-node
# Linux:
LOG_DIR=~/.local/share/freenet-test-node/logs

mkdir -p "$LOG_DIR"

Running Local Nodes

Single node (simplest)

Your existing node on port 7509 works. Publish test contracts to it directly.

Isolated test node (won't affect your running node)

IMPORTANT: Gateway nodes require --public-network-address. Always use --log-dir to isolate logs from your main node.

freenet network \
  --network-port 31338 \
  --ws-api-port 7510 \
  --ws-api-address 0.0.0.0 \
  --is-gateway \
  --skip-load-from-network \
  --data-dir ~/freenet-test-node/data \
  --public-network-address 127.0.0.1 \
  --log-dir "$LOG_DIR" \
  --log-level debug

Persistent data lives in --data-dir and logs in --log-dir, but the gateway bootstrap list is NOT isolated by --data-dir — see Isolation pitfalls below before assuming the node is offline-only. Likewise, fdev defaults to port 7509 and will silently target whichever node owns that port (often the system service, not your test node).

WARNING: Do NOT use --id for local dev. It creates ephemeral temp directories that get wiped on restart, destroying delegate secrets (signing keys, app data). Use --data-dir for persistent isolation instead.

Isolation pitfalls

--data-dir does NOT isolate the gateway bootstrap list

freenet reads gateways.toml from the global config directory regardless of --data-dir:

• macOS: ~/Library/Application Support/The-Freenet-Project-Inc.Freenet/gateways.toml
• Linux: ~/.config/freenet/gateways.toml

On a machine with an existing Freenet install, a "local" test node will dial real public gateways (e.g. nova.locut.us, vega.locut.us) and attempt NAT traversal to live peers — silently joining the public network.

To fully isolate, override HOME so the node sees an empty gateway list:

# macOS
mkdir -p ~/iso-home/Library/Application\ Support/The-Freenet-Project-Inc.Freenet
printf 'gateways = []\n' > ~/iso-home/Library/Application\ Support/The-Freenet-Project-Inc.Freenet/gateways.toml

# Linux
mkdir -p ~/iso-home/.config/freenet
printf 'gateways = []\n' > ~/iso-home/.config/freenet/gateways.toml

# Then launch with HOME overridden. For an isolated *gateway* node
# (--is-gateway, no --gateway flags), expect 0 bootstrap gateways:
HOME=~/iso-home freenet network --is-gateway --skip-load-from-network ...

# For an isolated *peer* node, pass your local gateway(s) explicitly:
HOME=~/iso-home freenet network --gateway "127.0.0.1:31337,$GATEWAY_PUBKEY" ...

Note: an empty gateways.toml will fail with missing field 'gateways'. The file must contain gateways = [].

Verification: grep the node log for the initial-join line and confirm the gateway count matches what you passed:

grep "Starting initial join procedure" "$LOG_DIR"/freenet.*.log
# Expect: "...with N gateways" where N == number of --gateway flags
# For an isolated gateway node (no --gateway flags), N must be 0.
# If N is higher than expected, isolation is broken.

Upstream tracking: freenet/freenet-core#3980.

fdev defaults to port 7509

fdev targets ws://127.0.0.1:7509 unless --port is passed. On a dev machine running a system Freenet service (which owns 7509), fdev publish ... without --port silently goes to that node, not your isolated test node.

# WRONG: silently targets whichever node owns 7509 (often the system service)
fdev publish --code ... contract ...

# RIGHT: always pass --port when targeting a non-default test node
fdev --port 7510 publish --code ... contract ...

Symptom of a misdirected publish: "Signature verification failed: signature error" on a fresh publish to the test node, because the system node has stale contract state from a previous run signed by a different key. If you see this on a "fresh" test, check which node fdev actually hit.

When a publish runs through cargo-make (e.g. a publish-* task) rather than fdev directly, there is no --port flag to pass — the task hardcodes the default port internally. Override it with the WS_API_PORT environment variable instead:

# Targets the isolated test node on 7510 instead of the default 7509
WS_API_PORT=7510 cargo make publish-myapp

The failure mode for a misdirected cargo-make publish is the unhelpful put failed after 4 attempts, which gives no hint that the port was wrong — so set WS_API_PORT whenever the target node isn't on 7509.

--data-dir does NOT isolate config.toml either — use --config-dir per node

Two freenet processes on the same host that pass the same (or default) config directory share config.toml AND secrets/transport-keypair.pem. Symptoms: second node fails to bind its UDP port, or both nodes use identical peer IDs and the network refuses the duplicate connection.

For a deterministic multi-node harness on one host (gateway + peer + …), pass --config-dir explicitly to each node, NOT just --data-dir:

freenet network --config-dir /tmp/iso-net/gw/config   --data-dir /tmp/iso-net/gw/data   ...
freenet network --config-dir /tmp/iso-net/peer/config --data-dir /tmp/iso-net/peer/data ...

CI gotcha: on Linux runners that set XDG_CONFIG_HOME (e.g. ubicloud, sometimes GitHub Actions images), dirs::config_dir() returns $XDG_CONFIG_HOME regardless of HOME — so the HOME=~/iso-home … trick from the previous section is bypassed. --config-dir is the only flag that wins against XDG_CONFIG_HOME. Use it any time the harness must run identically on dev laptops and CI.

A working reference harness lives at scripts/run-isolated-nodes.sh in the freenet/mail repo — covers up / down / wipe / status, full state wipe between test runs (avoids day-1 AFT cap carryover in repeated E2E runs), and FREENET_E2E_KEEP=1 to leave nodes up for post-mortem.

Two-node local network

# Terminal 1: Gateway
freenet network \
  --network-port 31337 \
  --ws-api-port 7509 \
  --is-gateway \
  --skip-load-from-network \
  --data-dir ~/freenet-local-gw/data \
  --public-network-address 127.0.0.1 \
  --log-dir ~/freenet-local-gw/logs \
  --log-level debug

# Terminal 2: Peer (get gateway pubkey first)
GATEWAY_KEY=$(cat ~/.config/Freenet/secrets/local-gw/transport.pub 2>/dev/null || echo "CHECK_PUBKEY")
freenet network \
  --network-port 31338 \
  --ws-api-port 7510 \
  --gateway "127.0.0.1:31337,${GATEWAY_KEY}" \
  --skip-load-from-network \
  --data-dir ~/freenet-local-peer/data \
  --log-dir ~/freenet-local-peer/logs \
  --log-level debug

Mobile testing (phone on same WiFi)

# Bind WebSocket API to all interfaces (--ws-api-address 0.0.0.0)
freenet network \
  --ws-api-address 0.0.0.0 \
  --ws-api-port 7510 \
  --network-port 31338 \
  --is-gateway \
  --skip-load-from-network \
  --data-dir ~/freenet-mobile-test/data \
  --public-network-address 127.0.0.1 \
  --log-dir ~/freenet-mobile-test/logs \
  --log-level debug

# Phone opens: http://{YOUR_LAN_IP}:7510/v1/contract/web/{CONTRACT_ID}/
# Find LAN IP:
#   macOS:  ifconfig en0 | grep "inet "
#   Linux:  ip addr show wlan0

Multi-instance deployment (10 peers + gateway)

# Uses deploy-local-gateway.sh from freenet-core
cd /path/to/freenet-core
scripts/deploy-local-gateway.sh --all-instances

Publishing Contracts Locally

Using fdev

IMPORTANT: fdev argument order matters. --code and --parameters go before the contract subcommand. --port goes before execute.

# Publish a contract with webapp
fdev --port 7510 execute put \
  --code target/wasm32-unknown-unknown/release/my_contract.wasm \
  --parameters params.bin \
  contract \
  --webapp-archive target/webapp/webapp.tar.xz \
  --webapp-metadata target/webapp/webapp.metadata

# Get contract ID without publishing
fdev get-contract-id \
  --code target/wasm32-unknown-unknown/release/my_contract.wasm \
  --parameters params.bin

Targeting a specific node

Override the WebSocket port for fdev:

fdev --port 7510 execute put --code ... contract ...

Querying Node State

# List connected peers and subscriptions
fdev query

# Get detailed node diagnostics
fdev diagnostics

# Get diagnostics for specific contracts
fdev diagnostics --contract <base58_contract_id>

WebSocket API

Connection

ws://127.0.0.1:7509/v1/contract/command?encodingProtocol=native

• Encoding: native (bincode) or flatbuffers
• Auth: Send ClientRequest::Authenticate { token } after connecting
• Tokens: Generated per-connection, base58-encoded 32 bytes. Invalidated on node restart (error prefix: AUTH_TOKEN_INVALID).

Request Types

pub enum ClientRequest {
    ContractOp(ContractRequest),   // GET, PUT, UPDATE, Subscribe
    DelegateOp(DelegateRequest),   // Delegate operations
    Authenticate { token },         // Auth token
    NodeQueries(NodeQuery),         // Queries (see below)
    Disconnect { cause },           // Close with reason
    Close,                          // Graceful close
}

NodeQuery Variants

NodeDiagnostics Config

NodeDiagnosticsConfig {
    include_node_info: bool,           // Peer ID, location, uptime
    include_network_info: bool,        // Active connections, peer list
    include_subscriptions: bool,       // Active subscriptions
    contract_keys: Vec<ContractKey>,   // Specific contracts (empty = all)
    include_system_metrics: bool,      // Connection count, hosting contracts
    include_detailed_peer_info: bool,  // Full peer details
    include_subscriber_peer_ids: bool, // Peer IDs of subscribers per contract
}

Wire-format change (stdlib v0.7.0): NodeDiagnosticsResponse.contract_states is now HashMap<String, ContractState> where the key is the Base58-encoded ContractKey::Display form (the instance field, not the full struct). Previously it was HashMap<ContractKey, ContractState> but that serialization broke JSON because the key was a struct. To map back to a typed ContractKey, decode the Base58 string and reconstruct. This is a bidirectional bincode break — match node and tooling versions.

for (key_str, state) in diag.contract_states.iter() {
    // key_str is the Base58 ContractKey instance id
}

Config File Reference

mode = "network"                      # "network" or "local"
network-address = "0.0.0.0"
network-port = 54761                  # UDP port for peer traffic
ws-api-address = "0.0.0.0"
ws-api-port = 7509                    # HTTP + WebSocket port
min-number-of-connections = 25
max-number-of-connections = 100
transient-budget = 2048               # Max concurrent transient connections (gateway)
transient-ttl-secs = 30              # TTL for unpromoted transient connections
token-ttl-seconds = 86400            # Auth token lifetime
token-cleanup-interval-seconds = 300
log_level = "info"
is_gateway = false

Ring Distance

Each peer has a ring location in [0.0, 1.0). Distance between two locations:

distance = min(|a - b|, 1.0 - |a - b|)

Max distance is 0.5. Use the dashboard peer table to get locations and compute distances.

Debugging

Check node status

# Node status page
curl -s http://127.0.0.1:7510/

# Active WebSocket connections
lsof -i :7510 -P | grep ESTABLISHED     # macOS
ss -tnp | grep 7510                      # Linux

Check node logs

# Follow logs (use your --log-dir path)
tail -f "$LOG_DIR"/freenet.$(date +%Y-%m-%d-%H).log

# Filter for contract/delegate events
tail -f "$LOG_DIR"/freenet.*.log | grep -i "delegate\|contract\|websocket\|error\|sign"

Each node instance should use --log-dir pointing to a unique directory so logs don't interleave.

Debugging node logs

Key patterns to search for:

# Follow all delegate + contract activity
grep -i "delegate\|sign\|update\|put\|subscribe" "$LOG_DIR"/freenet.*.log | tail -50

# Track a specific operation by transaction ID
grep "01KK70QEAR" "$LOG_DIR"/freenet.*.log

# WebSocket lifecycle
grep -i "websocket\|connection\|disconnect\|client" "$LOG_DIR"/freenet.*.log | tail -20

Debugging with Playwright (automated browser testing)

Use the Playwright MCP tools to test the full UI flow without manual interaction:

1. browser_navigate → open the contract URL
2. browser_snapshot → see the DOM state
3. browser_click / browser_fill_form → interact with the UI
4. browser_console_messages → check for WASM panics or JS errors

Especially useful for reproducing mobile issues on desktop, where console output is visible. If a flow works in Playwright but not on mobile, the issue is likely WebSocket suspension or browser caching.

Mobile-specific debugging

Browser caching: Mobile browsers aggressively cache WASM bundles. After republishing, use a cache-busting URL parameter:

http://{IP}:7510/v1/contract/web/{CONTRACT_ID}/?_v={timestamp}

Or clear browser cache / force close and reopen. Firefox mobile is particularly aggressive about caching.

WebSocket suspension: Mobile browsers suspend WebSocket connections when:

• Screen locks
• Tab goes to background
• Browser switches to another app
• Heavy WASM computation starves the event loop

Your app should handle reconnection when the tab becomes visible again. Consider implementing a visibilitychange listener that re-establishes the WebSocket connection.

Common issues

Other Infrastructure

Docker containers (freenet-core)

# Gateway container
cd /path/to/freenet-core/docker/freenet-gateway
docker-compose up

# Node container
cd /path/to/freenet-core/docker/freenet-node
docker-compose up

fdev simulation testing

# Single-process test network (no real networking)
fdev test --gateways 2 --nodes 10 --events 100 --seed 0xDEADBEEF single-process

# With fault injection
fdev test --message-loss 0.1 --latency-min 50 --latency-max 200 single-process

Related Skills

• dapp-builder: Design and architect new Freenet dApps
• telemetry-monitor: Analyze network telemetry from the central collector
• release: Publish production releases