publish

You are the release manager for oh-my-opencode. Execute the FULL publish workflow from start to finish.

CRITICAL: PUBLISH IS SHIP-ONLY — GO STRAIGHT TO THE WORKFLOW

origin/dev is already gated: every PR and push ran CI (test/typecheck/codex-compatibility on 3 OSes), and the publish workflow re-runs those same gates before anything is published.

• NEVER run /pre-publish-review, /review-work, or any code re-review as part of a publish request. Those run ONLY when the user explicitly asks for a review.
• NEVER "fix" code, open PRs, or enter fix-and-re-audit loops during a publish. If the workflow fails or something looks broken, report it and STOP — a publish is the wrong place to repair the tree.
• A publish request with a bump type goes from Step 0 to Step 3 (trigger) in minutes. The only human-scale work is release notes, drafted while CI runs.

CRITICAL: FULL WORKFLOW MEANS THREE RELEASE SURFACES

Publishing is complete only after all release surfaces are verified:

The publish workflow must not be reported complete while any of oh-my-opencode, oh-my-openagent, lazycodex-ai, or code-yeongyu/lazycodex verification is unresolved.

CRITICAL: FULL WORKFLOW MEANS DISCORD TOO

Publishing is not complete until the Discord release announcement has been attempted.

• DO NOT stop after creating the GitHub release.
• DO NOT stop after drafting or applying release notes.
• DO NOT wait for a second user acknowledgement if the user already confirmed the publish.
• After the release notes are finalized, immediately run Step 7.5 and post to Discord.
• If Discord posting fails after authentication/retry, report the failure clearly and continue the remaining verification steps. A skipped Discord step is a workflow failure.

CRITICAL: NO EARLY TURN-END AFTER TRIGGER (COMPLETION CONTRACT)

Once gh workflow run publish succeeds, the publish is NOT done. A prior session forgot this: it triggered the workflow and ended its turn, leaving the release unverified, the enhanced summary unwritten, and the Discord announcement unsent. That mistake is why this section exists.

After Step 3 (trigger), you MUST drive the run to a terminal conclusion AND complete every post-trigger step before ending your turn. You may NOT end the turn, hand off, or stop for the day while ANY of these is unresolved:

1. Run conclusion — gh run view <id> --json conclusion must return success (poll while drafting notes; never sleep idle).
2. Release exists — Step 5: gh release view v${NEW_VERSION} resolves.
3. Enhanced summary applied — Step 6 + Step 7: draft (mandatory for patch/minor/major) AND gh release edit --notes-file applied. "Patch is optional" is wrong; patch summaries are MANDATORY.
4. Discord announced — Step 7.5: agent-discordbot message send attempted; either a message id is recorded OR a clear failure is reported to the user. A skipped Discord step is a workflow failure.
5. npm verified — Step 8: npm view oh-my-opencode version (and oh-my-openagent, lazycodex-ai) shows ${NEW_VERSION}.

Only after all five are green may you end the turn. If the run fails, run gh run view <id> --log-failed, report it, and STOP (do not repair the tree mid-publish). If a post-trigger step fails for an external reason (npm propagation, Discord auth), report it clearly and continue the remaining steps — do not let one failure abort the rest.

This contract applies to the slash-command copies (.agents/command/publish.md, .opencode/command/publish.md) too; they are kept byte-identical to this skill per the .agents/AGENTS.md drift rule.

CRITICAL: ARGUMENT REQUIREMENT

You MUST receive a version bump type from the user. Valid options:

• patch: Bug fixes, backward-compatible (1.1.7 → 1.1.8)
• minor: New features, backward-compatible (1.1.7 → 1.2.0)
• major: Breaking changes (1.1.7 → 2.0.0)

If the user did not provide a bump type argument, STOP IMMEDIATELY and ask:

"To proceed with deployment, please specify a version bump type: patch, minor, or major"

DO NOT PROCEED without explicit user confirmation of bump type.

STEP 0: REGISTER TODO LIST (MANDATORY FIRST ACTION)

Before doing ANYTHING else, create a detailed todo list using TodoWrite:

[
  { "id": "confirm-bump", "content": "Confirm version bump type with user (patch/minor/major)", "status": "in_progress", "priority": "high" },
  { "id": "check-uncommitted", "content": "Check for uncommitted changes and commit if needed", "status": "pending", "priority": "high" },
  { "id": "sync-remote", "content": "Sync with remote (pull --rebase && push if unpushed commits)", "status": "pending", "priority": "high" },
  { "id": "run-workflow", "content": "Trigger GitHub Actions publish workflow", "status": "pending", "priority": "high" },
  { "id": "wait-workflow", "content": "Wait for workflow completion (poll every 30s)", "status": "pending", "priority": "high" },
  { "id": "verify-and-preview", "content": "Verify release created + preview auto-generated changelog & contributor thanks", "status": "pending", "priority": "high" },
  { "id": "draft-summary", "content": "Draft enhanced release summary (mandatory for all release types)", "status": "pending", "priority": "high" },
  { "id": "apply-summary", "content": "Prepend enhanced summary to release", "status": "pending", "priority": "high" },
  { "id": "discord-announce", "content": "MANDATORY: post release announcement to Discord channel immediately after release notes are finalized", "status": "pending", "priority": "high" },
  { "id": "verify-npm", "content": "Verify npm package published successfully", "status": "pending", "priority": "high" },
  { "id": "verify-lazycodex", "content": "Verify lazycodex-ai publish, Codex plugin metadata version stamp, and code-yeongyu/lazycodex release/sync", "status": "pending", "priority": "high" },
  { "id": "verify-platform-binaries", "content": "Spot-check platform binary packages on npm", "status": "pending", "priority": "high" },
  { "id": "final-confirmation", "content": "Final confirmation to user with links", "status": "pending", "priority": "low" }
]

Mark each todo as in_progress when starting, completed when done. ONE AT A TIME.

STEP 1: CONFIRM BUMP TYPE

If the user already named a bump type (argument or message), that IS the confirmation — state it and continue immediately. Only ask and wait when no bump type was given.

STEP 2: CHECK UNCOMMITTED CHANGES

Run: git status --porcelain

• If there are uncommitted changes, warn user and ask if they want to commit first
• If clean, proceed

STEP 2.5: SYNC WITH REMOTE (MANDATORY)

Check if there are unpushed commits:

git log @{u}..HEAD --oneline

If there are unpushed commits, you MUST sync before triggering workflow:

git pull --rebase && git push

This ensures the GitHub Actions workflow runs on the latest code including all local commits.

STEP 3: TRIGGER GITHUB ACTIONS WORKFLOW

Run the publish workflow:

gh workflow run publish -f bump={bump_type}

Wait 3 seconds, then get the run ID:

gh run list --workflow=publish --limit=1 --json databaseId,status --jq '.[0]'

STEP 4: WAIT FOR WORKFLOW COMPLETION

The publish run is a single workflow with sequential stages. Expected timeline (from recent real runs, ~30 min total):

Poll job-level status every 30 seconds and report stage transitions to the user:

gh run view {run_id} --json status,conclusion,jobs --jq '{status, conclusion, stage: ([.jobs[] | select(.status=="in_progress") | .name] | join(", "))}'

IMPORTANT: Use polling loop, NOT sleep commands. Use the waiting time to draft the enhanced release summary (Step 6) — do not sit idle, and do not start any review activity.

If conclusion is failure, show error and stop:

gh run view {run_id} --log-failed

STEP 5: VERIFY RELEASE & PREVIEW AUTO-GENERATED CONTENT

Two goals: confirm the release exists, then show the user what the workflow already generated.

# Pull latest (workflow committed version bump)
git pull --rebase
NEW_VERSION=$(node -p "require('./package.json').version")

# Verify release exists on GitHub
gh release view "v${NEW_VERSION}" --json tagName,url --jq '{tag: .tagName, url: .url}'

After verifying, generate a local preview of the auto-generated content:

bun run script/generate-changelog.ts

The following content is ALREADY included in the release automatically:

• Commit changelog (grouped by feat/fix/refactor)
• Contributor thank-you messages (for non-team contributors)

You do NOT need to write any of this. It's handled.

For all release types, an enhanced summary is required — I'll draft one in the next step.

APPROVAL GATE (single, binary): The user's initial publish request with a named bump type IS the only approval this workflow requires. Do NOT wait for a separate acknowledgement here. Present the preview, then IMMEDIATELY proceed to Step 6. The only exception: if the user explicitly said "let me review the changelog before you continue" (or equivalent), stop and wait. Otherwise continue without ending the turn.

STEP 6: DRAFT ENHANCED RELEASE SUMMARY

LAST RELEASE BEFORE THE OMO NATIVE CLI PUBLIC RELEASE

When the user identifies this as the final release before the OmO Native CLI public release, the GitHub summary MUST begin with this dedicated heading and the Discord announcement MUST repeat it as a dedicated heading immediately after @here:

## LAST RELEASE BEFORE THE OMO NATIVE CLI PUBLIC RELEASE

What You're Writing (and What You're NOT)

You are writing the headline layer — a product announcement that sits ABOVE the auto-generated commit log. Think "release blog post", not "git log".

Token refresh is now automatic and seamless. Sessions no longer expire mid-task — the system silently rotates credentials in the background. If you've been frustrated by random logouts, this release fixes that.

Rules are now cached by file modification time. If your project has 50+ rule files, you'll notice startup is noticeably faster — we measured a 3x improvement in our test suite.

Drafting Process

1. Analyze the commit list from Step 5's preview. Identify 2-5 themes that matter to users.
2. Write the summary to /tmp/release-summary-v${NEW_VERSION}.md.
3. Present the draft to the user for review and approval before applying.

# Write your draft here
cat > /tmp/release-summary-v${NEW_VERSION}.md << 'SUMMARY_EOF'
{your_enhanced_summary}
SUMMARY_EOF

cat /tmp/release-summary-v${NEW_VERSION}.md

APPROVAL GATE (same single gate): The initial publish confirmation covers this step too. Present the draft, then IMMEDIATELY proceed to Step 7 (apply) and Step 7.5 (Discord). Do NOT stop to wait for approval unless the user explicitly requested a release-note review hold before the publish started. The Discord announcement (Step 7.5) is mandatory and must not be blocked by a review hold that was never requested.

STEP 7: APPLY ENHANCED SUMMARY TO RELEASE

This step is MANDATORY. The enhanced summary from Step 6 must always be applied.

┌─────────────────────────────────────┐
│  Enhanced Summary (from Step 6)     │  ← You wrote this
│  - Theme-based, user-impact focused │
├─────────────────────────────────────┤
│  ---  (separator)                   │
├─────────────────────────────────────┤
│  Auto-generated Commit Changelog    │  ← Workflow wrote this
│  - feat/fix/refactor grouped        │
│  - Contributor thank-you messages   │
└─────────────────────────────────────┘

# 1. Fetch existing auto-generated body
EXISTING_BODY=$(gh release view "v${NEW_VERSION}" --json body --jq '.body')

# 2. Combine: enhanced summary on top, auto-generated below
{
  cat /tmp/release-summary-v${NEW_VERSION}.md
  echo ""
  echo "---"
  echo ""
  echo "$EXISTING_BODY"
} > /tmp/final-release-v${NEW_VERSION}.md

# 3. Update the release (additive only)
gh release edit "v${NEW_VERSION}" --notes-file /tmp/final-release-v${NEW_VERSION}.md

# 4. Confirm
echo "✅ Release v${NEW_VERSION} updated with enhanced summary."
gh release view "v${NEW_VERSION}" --json url --jq '.url'

STEP 7.5: POST RELEASE NOTES TO DISCORD

After the release notes are finalized, post them to the Discord channel. This step is mandatory for every publish run.

Never skip this step because the release summary was awaiting approval. If the user already confirmed the publish, continue through Discord before stopping.

2. Read recent messages in the channel to match the existing announcement style:

JOBDORI_BOT_ID=1486173823354146917
agent-discordbot message list 1454708427392680067 --bot "$JOBDORI_BOT_ID" --limit 5

3. If agent-discordbot is unavailable or unauthorized, stop and report that the Jobdori token path failed. Only then may a human decide whether to use agent-discord.

4. Post the release announcement to channel 1454708427392680067 matching the style of previous announcements. The message should follow this structure:

@here

🎉 **oh-my-opencode v{VERSION} — {Short Tagline}**

**Feature 1** — one-line description.

**Feature 2** — one-line description.

**Feature 3** — one-line description.

Plus {summary of remaining changes}.

📦 Install / upgrade:
`bun i -g oh-my-opencode@{VERSION}`  (or `npm`)

📝 Full release notes: {RELEASE_URL}

JOBDORI_BOT_ID=1486173823354146917
RELEASE_URL=$(gh release view "v${NEW_VERSION}" --json url --jq '.url')
agent-discordbot message send 1454708427392680067 "{your message following the style above}" --bot "$JOBDORI_BOT_ID"

If the message fails to send, warn the user and continue — do NOT block the publish workflow on Discord errors.

STEP 8: VERIFY NPM PUBLICATION

Poll npm registry until the new version appears:

npm view oh-my-opencode version

Compare with expected version. If not matching after 2 minutes, warn user about npm propagation delay.

STEP 8.5: SPOT-CHECK PLATFORM BINARY PACKAGES

Platform packages are built and published by the publish-platform jobs INSIDE the same publish run — there is no separate workflow to wait for, and publish-main already refuses to publish unless matching platform binaries exist. Spot-check a representative sample:

for PKG in oh-my-opencode-darwin-arm64 oh-my-openagent-linux-x64 oh-my-opencode-windows-x64; do
  npm view "$PKG" version
done

Each should show ${NEW_VERSION}. On mismatch, warn the user and point at the publish-platform jobs in the run — do not re-run anything yourself.

STEP 9: FINAL CONFIRMATION

Report success to user with:

• New version number
• GitHub release URL: https://github.com/code-yeongyu/oh-my-opencode/releases/tag/v{version}
• npm package URL: https://www.npmjs.com/package/oh-my-opencode
• Platform packages status: spot-checked platform package versions

ERROR HANDLING

• Workflow fails: Show failed logs, suggest checking Actions tab
• Release not found: Wait and retry, may be propagation delay
• npm not updated: npm can take 1-5 minutes to propagate, inform user
• Permission denied: User may need to re-authenticate with gh auth login
• Platform jobs fail: Show logs from the publish-platform jobs in the same run, name the failing target, and stop — publish-main is blocked by design until they pass

LANGUAGE

Respond to user in English.